If your phone does not automatically update Freebuds Studio, you can do it manually:
Phone settings -> apps and services -> app management -> four dots in the upper right corner -> select the display system program and search for audio product manager -> storage -> delete data, turn Bluetooth off and on and reconnect the headset.

Huawei Freebuds Studio Update content:

• Audio connection center (must be used with Smart Life App 11.1.1.316 and above, iOS currently does not support)
• HarmonyOS HyperTerminal (functional background configuration in batches expected by end of November; headset firmware versions below 162 will impact HyperTerminal experience)

Note: The update may be at different times depending on the region and country.

The post Huawei Freebuds Studio software update 1.0.0.162 appeared first on Huawei NewOS.

Huawei FreeBuds Studio provides quality sound with ANC solution, detects noise and provides sound insulation suitable for the noise level. The dynamic sensing system can accurately identify ambient sounds. It can automatically switch between Ultra Mode, General Mode and Comfort Mode depending on the environment it is in.

Let’s give an example of this feature: Imagine traveling on a noisy train. Thanks to its dynamic detection system, FreeBuds Studio automatically switches to “Ultra Mode”. The sound of cafes, restaurants and so on. places working in “General Mode”. Places with less noise, office environment, library, home, etc. In places, “Relax Mode” works for more natural and comfortable noise canceling effects.

Huawei FreeBuds Studio uses Huawei’s self-developed high resolution codec L2HC to support high speed and stable audio transmission of up to 960 kbps. The headset, which can block noise according to different environments, can eliminate noise up to 40 dB. It has an internal IMU ambient sensor and microphone system. There are three different ANC modes that can adapt to the environment for noise reduction thanks to the ratio detection in the microphone feature. It offers high definition sound quality with a wide frequency of up to 48 kHz for high quality sound level (Hi-Fi) listening experience. The headset uses 4-layer 40-millimeter dynamic drivers. In this way, an ultra-wide response range between 4Hz-48kHz can be achieved.

Thanks to its Bluetooth 5.2 connection technology, Freebuds Studio can connect to two devices at the same time. Also, you need to use “Huawei AI Life” application to block noise modes and control its features.

You can use Huawei FreeBuds Studio for 24 hours on a single charge. It also has 8 hours of use with 10 minutes of charging. It can take about an hour to fully charge.

Huawei FreeBuds Studio Specifications

• Sound Technology: Active Noise Canceling, Noise Canceling on Call
• Sensor: Microphone Sensor, Capacitance Sensor, IMU sensor
• Wear Detection: Supported
• Bluetooth Compatibility: BT 5.2
• Pop-up and Mapping: Supported
• Weight: 260 grams
• Dimensions: 194 mm x 152 mm x 81.5 mm
• Battery Capacity: 410 mAh
• Charging Time: 60 minutes
• Play Time: 24 hours playback on 1 charge (with ANC off)
• 5 hours play with 10 minutes quick charge (with ANC enabled)
• 8 hours play with 10 minutes quick charge (with ANC disabled)
• Charging: USB Type-C (Wired)
• Intelligent Dynamic AC
• Ultra Wide Frequency Response Range
• L2HC High Resolution Code Decoding
• Sound Isolation Mode
• 6 Mic Noise Canceling on Call
• Dual Device Connection

The post What is Huawei FreeBuds Studio Features appeared first on Huawei NewOS.

According to the Geekbench listing, the Huawei Mate 40 Pro will have 8GB of RAM. It is said that it will be Android 10 and will support 5G feature.

It suggests that the Mate 40 Pro smartphone could be launched with a dual-hole display with a 120 Hz refresh rate. It may have a quad rear camera on its back.

The post FreeBuds Studio will be released with Mate 40 Series appeared first on Huawei NewOS.